1. Cell Cycle/DNA Damage Metabolic Enzyme/Protease
  2. HSP
  3. PU-WS13

PU-WS13 是一种选择性的 Grp94 抑制剂,EC50 值为 0.22 μM。

MCE 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务

我们将采用定制合成服务的方式为您快速提供所需产品和技术服务

PU-WS13 Chemical Structure

PU-WS13 Chemical Structure

CAS No. : 1454619-14-7

1.  客户无需承担相应的运输费用。

2.  同一机构(单位)同一产品试用装仅限申领一次,同一机构(单位)一年内

     可免费申领三个不同产品的试用装。

3.  试用装只面向终端客户

规格 价格 是否有货 数量
10 mM * 1 mL in DMSO ¥990
In-stock
5 mg ¥900
In-stock
10 mg ¥1430
In-stock
50 mg 现货 询价
100 mg   询价  
200 mg   询价  

* Please select Quantity before adding items.

Customer Review

  • 生物活性

  • 实验参考方法

  • 纯度 & 产品资料

  • 参考文献

生物活性

PU-WS13 is a selective Grp94 inhibitor, with an EC50 of 0.22 μM.

IC50 & Target[1]

GRP94

0.22 μM (EC50)

HSP90α

27.3 μM (EC50)

HSP90β

41.8 μM (EC50)

TRAP-1

7.3 μM (EC50)

体外研究
(In Vitro)

PU-WS13 is a Grp94 inhibitor, with an EC50 of 0.22 μM. PU-WS13 also slightly suppresses Hsp90α, Hsp90β and Trap-1, with EC50s of 27.3, 41.8 and 7.3 μM, respectively. PU-WS13 (2.5-20 μM) shows no toxicity on two nonmalignant cell lines. PU-WS13 (15 μM) disrupts the circular architecture of HER2 at the plasma membrane of SKBr3 cells mediated through Grp94. PU-WS13 inhibits Grp94, and the inhibition induces apoptosis in and reduce the viability of HER2 overexpressing breast cancer cells[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

411.35

Formula

C17H20Cl2N6S

CAS 号
性状

固体

颜色

White to off-white

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
溶解性数据
细胞实验: 

DMSO 中的溶解度 : ≥ 40 mg/mL (97.24 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.4310 mL 12.1551 mL 24.3102 mL
5 mM 0.4862 mL 2.4310 mL 4.8620 mL
查看完整储备液配制表

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

  • 摩尔计算器

  • 稀释计算器

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

质量
=
浓度
×
体积
×
分子量 *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

浓度 (start)

C1

×
体积 (start)

V1

=
浓度 (final)

C2

×
体积 (final)

V2

动物实验:

请根据您的 实验动物和给药方式 选择适当的溶解方案。

以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:
——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用
以下溶剂前显示的百分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 方案 一

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (6.08 mM); 澄清溶液

    此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。

    1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;再向上述体系中加入 50 μL Tween-80,混合均匀;然后再继续加入 450 μL 生理盐水 定容至 1 mL

    生理盐水的配制:将 0.9 g 氯化钠,溶解于 ddH₂O 并定容至 100 mL,可以得到澄清透明的生理盐水溶液。
  • 方案 二

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (6.08 mM); 澄清溶液

    此方案可获得 ≥ 2.5 mg/mL(饱和度未知)的澄清溶液。

    1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液 中,混合均匀。

    20% SBE-β-CD in Saline 的配制(4°C,储存一周):2 g SBE-β-CD(磺丁基醚 β-环糊精)粉末定容于 10 mL 的生理盐水中,完全溶解至澄清透明。
动物溶解方案计算器
请输入动物实验的基本信息:

给药剂量

mg/kg

动物的平均体重

g

每只动物的给药体积

μL

动物数量

由于实验过程有损耗,建议您多配一只动物的量
请输入您的动物体内配方组成:
%
DMSO +
+
%
Tween-80 +
%
Saline
如果您的动物是免疫缺陷鼠或者体弱鼠,建议 DMSO 中的在最后工作液体系中的占比尽量不超过 2%。
方案所需 助溶剂 包括:DMSO ,均可在 MCE 网站选购。 Tween 80,均可在 MCE 网站选购。
计算结果
工作液所需浓度 : mg/mL
储备液配制方法 : mg 药物溶于 μL  DMSO(母液浓度为 mg/mL)。
您所需的储备液浓度超过该产品的实测溶解度,以下方案仅供参考,如有需要,请与 MCE 中国技术支持联系。
动物实验体内工作液的配制方法 : 取 μL DMSO 储备液,加入 μL  μL ,混合均匀至澄清,再加 μL Tween 80,混合均匀至澄清,再加 μL 生理盐水
连续给药周期超过半月以上,请谨慎选择该方案。
请确保第一步储备液溶解至澄清状态,从左到右依次添加助溶剂。您可采用超声加热 (超声清洗仪,建议频次 20-40 kHz),涡旋吹打等方式辅助溶解。
纯度 & 产品资料

纯度: 99.94%

参考文献
Kinase Assay
[1]

The Hsp90 FP competition assays are carried out in black 96-well micro-plates in a total volume of 100 μL in each well. A stock of 10 μM cy3B-GM and PU-FITC3 is prepared in DMSO and diluted with Felts buffer (20 mM Hepes (K), pH 7.3, 50 mM KCl, 2 mM DTT, 5 mM MgCl2, 20 mM Na2MoO4 and 0.01% NP40 with 0.1 mg/mL BGG). To each well is added the fluorescent dye-labeled Hsp90 ligand (6 nM cy3B-GM for Hsp90α, Hsp90β and Grp94 and 3 nM PU-FITC3 for Trap-1), protein (10 nM Hsp90α, 10 nM Hsp90β, 10 nM Grp94, 30 nM Trap-1) and tested inhibitor (including PU-WS13, initial stock in DMSO) in a final volume of 100 μL Felts buffer. Compounds are added in duplicate or triplicate wells. For each assay, background wells (buffer only), tracer controls (free, fluorescent dye-labeled Hsp90 ligand only) and bound controls (fluorescent dye-labeled Hsp90 ligand in the presence of protein) are included on each assay plate. The assay plate is incubated on a shaker at 4°C for 24 h, and the FP values (in mP) are measured. The fraction of fluorescent dye-labeled Hsp90 ligand bound to Hsp90 is correlated to the mP value and plotted against values of competitor concentrations. The inhibitor concentration at which 50% of bound fluorescent dye-labeled Hsp90 ligand is displaced is obtained by fitting the data. For cy3B-GM, an excitation filter at 530 nm and an emission filter at 580 nm are used with a dichroic mirror of 561 nm. For PU-FITC3, an excitation filter at 485 nm and an emission filter at 530 nm are used with a dichroic mirror of 505 nm. All of the experimental data are analyzed, and binding affinity values are given as relative binding affinity values (EC50, concentration at which 50% of fluorescent ligand is competed off by compound)[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Assay
[1]

Cells are treated for 72 h with inhibitors (including PU-WS13) or transfected with Grp94 siRNA or control siRNA, and their viability is assessed using CellTiter-Glo luminescent Cell Viability Assay. The method determines the number of viable cells in culture based on quantification of the ATP present, which signals the presence of metabolically active cells[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

参考文献

完整储备液配制表

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

可选溶剂 浓度 溶剂体积 质量 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 2.4310 mL 12.1551 mL 24.3102 mL 60.7755 mL
5 mM 0.4862 mL 2.4310 mL 4.8620 mL 12.1551 mL
10 mM 0.2431 mL 1.2155 mL 2.4310 mL 6.0775 mL
15 mM 0.1621 mL 0.8103 mL 1.6207 mL 4.0517 mL
20 mM 0.1216 mL 0.6078 mL 1.2155 mL 3.0388 mL
25 mM 0.0972 mL 0.4862 mL 0.9724 mL 2.4310 mL
30 mM 0.0810 mL 0.4052 mL 0.8103 mL 2.0258 mL
40 mM 0.0608 mL 0.3039 mL 0.6078 mL 1.5194 mL
50 mM 0.0486 mL 0.2431 mL 0.4862 mL 1.2155 mL
60 mM 0.0405 mL 0.2026 mL 0.4052 mL 1.0129 mL
80 mM 0.0304 mL 0.1519 mL 0.3039 mL 0.7597 mL
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

您最近查看的产品:

Your information is safe with us. * Required Fields.

   产品名称:

 

* 需求量:

* 客户姓名:

 

* Email:

* 电话:

 

* 公司或机构名称:

   留言给我们:

Bulk Inquiry

Inquiry Information

产品名称:
PU-WS13
目录号:
HY-18680
需求量: